Iscar Announces A New Line Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar right now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the increased durability of the new Sumo Tec insert grades.
The conception, already established successful in Tang-Grip parting tools, has now been spread to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets accompanying a specific hand tool, and are held solidly in place without the need for clamps, upper jaws or set screws that can weaken the insert and hinder chip flow. The pocket configuration uses cutting forces to hold the insert seated solidly in position, preventing any risk of insert pull-out. The Tang-Grip clamping system also fosters additional accurate slitting cuts plus longer pocket and insert life.
Iscar's Sumo Tec insert grades feature a unique post-coating treatment which substantially boosts tool life and constancy.
Unveiled in late '07, the unique Sumo Tec treatment smooths the insert's coated surface to eliminate microscopic stress raisers, decrease heat and friction and increase chip flow. The result is improved toughness and opposition to chipping and built-up edge, all leading to enhanced tool lifespan. The golden-colored flank on Sumo Tec inserts eases wear detection. Size for size, Tangslit cutters offer more teeth than Iscar's SGSF cutters, enabling higher feed rates.
Their improved rigidity leads to straighter, additional accurate cuts and less vibration even in large-diameter cutters. The brand new Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accept the exact same assortment of inserts as Tang-Grip parting tools. Additional sizes will be added.
Obtainable Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate beneath a Sumo Tec TiAlN PVD coating, offering superior resistance to impact loads and built-up edge. This grade is endorsed for slitting heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel.
IC830, giving greater toughness for heavier parting & grooving involving interrupted cuts. It is appropriate for all stainless steel and high temperature alloys.
IC908, a hard, fine-grain substrate with exceptional chipping resistance, joined with a new Sumo Tec TiAlN PVD coating. It is perfect for nodular or grey cast iron.
IC928 and 928A, PVD TiAlN-coated tough grades suited for stainless steel, high temperature alloys and other alloy steels. These grades are also favored for interrupted cuts and heavy operations.
All Tangslit and Tang-Grip inserts are available in J- or C-type chipformer geometries from Iscar.
A Variety Of Progressions Have Increased Iscar's Line Of Indexable Endmills For Heightened Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Iscar Adds Their Most Recent Creations To A Long Line Of Prospering Hole Producing Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
New End Mills By Iscar Can Expand Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
A Couple Of The Many Advancements In Carbide Inserts By Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
The Most Recent In Carbide Endmill Configuration In A Long And Successful Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
A Handful Of Upgrades In Carbide Inserts Thanks To Iscar Over The Last Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.
Discovering The Ideal Commercial Water Heater For You Needs
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.
Graduate Job At Land Rover And Jaguar.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.
Brand New Land Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.
More Readings......
More Resources......
